#Anvil pipe shoe how to#

Data applicable to shields for thicker insulation or larger pipe sizes is available upon request. Ordering: Specify size, figure number and name. Provides extra safety during system operation.Is designed to work with Anvil brand hangers but is compatible with most hanger brands.Installs fast and without any required tools.Holds the insulation shield in place during installation.

#Anvil pipe shoe how to#

How to size: Refer to “shield size selection table” in the submittal. Service: Recommended for outside of foam or fiber glass insulation for distribution of loads to preclude crushing of insulation without breaking the vapor barrier.Īpprovals: Complies with Federal Specification A-A-1192A (Type 40), WW-H-171-E (Type 41), ANSI/MSS SP-69 and MSS SP-58 (Type 40). At the facility’s locations where I-Rod® had remained in service, there was no damage at all. The operator subsequently re-wrote their global spec to include I-Rod® on all pipe supports.Size Range: 1/2' through 24' pipe with up to 2' thick insulation It has 150,000 pounds of compressive strength, a temperature range of -320 to +400 degrees Fahrenheit, and is resistant to chemical attack. Custom pipe shoes and anchors can be designed to meet your specific design requirements. The ProTek composite pipe shoe is a UV-resistant, non-metallic pipe support that is built to withstand heavy pressure and especially hot and cold temperatures.

We built our reputation from the ground up. Today Anvil International is the largest and most complete fitting and hanger manufacturer in the world. Slide plates may be included on the pipe shoes for smooth sliding. 2004 Anvil International acquires Star Pipe Products, Building and Construction Divisions (SPF) and forms Anvil Star Fire Products Division. The brief flirtation with FRP pads ultimately caused hundreds of thousands of dollars in damage. Pipe shoes and pipe guides are available in a variety of designs. After the damage was once again repaired at a cost of $700 per location, the FRP pads were all replaced with I-Rod®. Undeterred, the operator replaced them with new FRP pads at a cost of $1,000 per location, and again, the pads failed within a year. The new FRP pads failed in less than a year, causing damage that cost $700 per location to repair. Since 2000, those quality products and services and the people who provide themhave been known as Anvil® International. A cautionary tale about FRP wear padsĪ number of years ago, we learned of a facility that decided – rather inexplicably – to replace most of their existing, undamaged I-Rod® with FRP wear pads. Anvil’s history stretches back to the mid 1800s, when a company named Grinnell® began providing its customers with the finest quality pipe products. Adding insult to injury, FRP pads cost at least $1,000 each to install. Sealing the seams to prevent water intrusion is rarely effective because the pipe and pad expand at different rates. Since pads make inspection impossible, the problem is not apparent until the pipe fails – which can be catastrophic. Loose FRP pads catch and trap water against the pipe, causing significant corrosion in a short amount of time.

Impressed current CP system, Cook Inlet.

Neptune SPAR hull anode replacement, GOM.

Forties Flowlines, Forties anode retrofit, North Sea.

Brent Pipeline anode retrofit, North Sea.

Methanol pipeline anode retrofit, Gulf of Guinea.

Semangkok pipeline anode retrofit, Malaysia.

We solve corrosion problems and improve anti-corrosion technology to reduce maintenance costs and preserve the integrity of infrastructure. Deepwater protects our clients’ assets from corrosion.